Any DIY project you're invested in will require the use of glue. When working with wood or particle boards, you do have the option of using nails too. However, when you want to stick two pieces together, your go-to solution is glue.
Given the toughness of particle boards, you need to choose the right glue to keep them affixed.
We know what you're thinking; just go to the hardware store and ask for the best glue they have, right?
No. These are the reasons why people end up buying glue that doesn't stick well.
Today, we will be looking at some of the top options for the best glue for particle board in the market. Just stick till the very end (pun intended).
Gorilla 7700104 Super Glue Gel
5 out of 5
J-B Weld 8257
5 out of 5
Glue Masters Super Glue
4.5 out of 5
Titebond H6838 - III Ultimate Wood Glue
4 out of 5
Elmer's E7310 Carpenter's Wood Glue Max
4.5 out of 5
8 Best Glue For Particle Board Reviews
For someone with no experience, it can be difficult to pick out the right glue. We have listed out 8 of our top picks based on their use and quality.
1. Gorilla 7700104 Super Glue Gel
To start off our reviews for the best glue for particle board, we have the super glue gel from Gorilla.
Being clear and super fast, this adhesive will bond everything within a matter of seconds. This makes it perfect for quick-fix jobs or DIY projects.
Firstly, The adhesive comes in 3 different options to give you the most bang for your buck.
You can get a 1 pack, 2 pack or even a 10 pack if you're a big DIY enthusiast. With one of these, you can bond anything and everything from wood, paper, leather, and even ceramic.
In addition, Gorilla has introduced their new no-run control gel formula, which prevents the glue from being runny.
This is quite a helpful feature when you have to stick vertical objects together. Using the super glue gel, just put small dots on every square-inch and place the surfaces together.
Moreover, the drying time for this glue is insanely fast. Without any need for clamping, the glue will stick your surfaces together within 10-45 seconds!
Once you have applied the glue, hold the surfaces together for a brief period of at max one minute to bind them.
What's more, you can easily store the glue without having to worry about it drying out. The container comes with an integrated anti-clog cap which prevents the glue from losing its binding properties.
- Fast-drying glue will save you wait time
- Anti-clog cap prevents the glue from drying out
- No-run gel makes it easy to apply on vertical surfaces
- Compatible with various surfaces for enhanced versatility
2. J-B Weld 8257 Wood Repair Epoxy Putty Stick
If you've got any sort of damage on your furniture from rotting, screw holes or cracks, this Epoxy putty will solve all your problems. Packed in a compact and portable tube, the putty is able to bond and rebuild any sort of wooden surface.
The J-B Weld 8257 KwikWood putty comes in 2 sizes, the standard 3.5-Inch tube and the larger 7-Inch tube. If you're thinking long term, the 7-Inch tube should last you for multiple repairs, and you'd also be able to use the putty generously.
The two-part epoxy putty formula is very easy to use too. All you need to do is tear some off and knead the putty in your hands.
Afterward, you apply the putty to both of the surfaces or the gaps you want to fill and leave them for about 15-25 minutes. Don't expect your putty to be entirely solid yet because it takes around an hour to cure as well.
What makes this putty absolutely magical is its shaping characteristics. The KwikWood stick has a lap shear strength of 900 PSI.
This means it is very durable and forms a strong bond. It is amazing how you can drill, sand, or even shape the putty once it's dry, as if it were actual wood!
- Comes in 2 size variants aiding flexibility
- Can be drilled and shaped making it versatile
- The soft putty can be molded which allows it to fill cracks
- Tube mechanism and quick setting time makes it easy to use
- Compact tube container for enhanced portability
3. Glue Masters Particle Board Glue
If you're looking for heavy-duty thick viscosity adhesive, then look no further. The professional-grade cyanoacrylate glue will strongly bind any material whether it be wood, plastic or even fabric.
The fact that Glue Masters have given you 5 different thick viscosity options to choose from is unbelievable. This allows you to cater your purchase according to your purpose.
You can choose from 3 variants of 2OZ viscosity, with levels ranging from thin, medium and thick. You can also choose the thicker 8OZ viscosity at medium and thick levels.
Featuring a quick and easy to use formula, you will be able to stick objects together in no time. Whether you're a professional or an amateur, this glue is for everyone.
With a setting time of about 60 seconds, you won't have to wait around for long hours.
The versatility of this adhesive truly exceeds even the best glue for particleboard. From small household repairs to fabric or shoe sole repairing, this glue will do it all!
As it is a thick viscosity glue, it isn't as runny as others, reducing the chances of creating a mess.
- Comes in 3 viscosity levels for enhanced variation
- Quick-drying formula to reduce wait periods
- Works with wood, leather, plastic which aids versatility
- The formula is less runny reducing the chances of making a mess
4. Titebond H6838 - III Ultimate Wood Glue
For outdoor or kitchenware storage projects, the Titebond H6838-III is one of those adhesives all households should have. The improved formula provides the toughest bonds with all-round weatherproofing.
Right off the bat, we need to applaud Titebond for making such a weather-resistant adhesive. For all the projects that will be exposed to rainwater or intense sunlight, you need a glue that doesn't lose its strength over time.
Passing the ANSI/HPVA Type 1 water-resistance specification, this glue will surpass anything mother nature throws at it.
What's more, this is the ideal option to choose when you're making shelves or cabinets for your kitchenware or food storage.
The formula is solvent-free and non-toxic, which means your food will be safe around it. This makes it ideal for kitchen and other household interior projects.
Moreover, the waiting time for the glue to strongly hold your particleboard elements together is also quite less. Within around 30 minutes, the glue will clamp your components together.
Featuring a strong initial tack, your surfaces are able to stick to one another more securely within the first few minutes. After that, it's only a matter of holding them in place till the clamping time is over.
- Heat-resistant which allows it to withstand high temperatures
- Water-resistant makes it ideal for outdoor usage
- Quick 30 minute clamping time reduces the waiting time
- The non-toxic formula makes it safe for your environment
5. Elmer's E7310 Carpenter's Wood Glue Max
Be it wood or particle boards, Elmer's E7310 wood glue will ensure a secure bond with most surfaces. As it has a tan color upon drying, you don't have to worry about the spots being too visible.
First off, the wood glue comes in a plastic 16-ounce bottle which has a twist cap for easy application.
Not only does the opening make it easy to apply, but it also prevents the glue from drying up when storing. After every use, you must make sure to twist the cap and seal the opening.
Moving on, you can use the E7310 in all of your interior and exterior projects. Featuring a strong, painted formula, the adhesive will keep your surfaces joined in the toughest weather conditions. The special concentration of the formula makes it resistant to heat, mold and even mildew.
The reason we said this glue was good for interior and exterior projects is mostly because of its non-toxic traits.
The adhesive might be lightweight, but it doesn't give off any sort of harmful fumes and is entirely non-toxic.
- Non-toxic formula is safe for indoors
- Resistant to heat, mold, and mildew making it durable
- Twist cap seals the bottle to prevent it from drying out
- Easy to clean using water which saves you from extra trouble
6. Gorilla Adhesive for Particle Board, 4 Ounce Bottle
Coming up next on the list, we have another variant of Gorilla's wood glue. Coming in a 4-ounce bottle in 1 and 2 pack options, this white-colored adhesive will solve all DIY project problems.
Built for indoor and outdoor purposes, the formula passes the ANSI/HPVA Type II water-resistance test. This means that your surfaces will remain stuck to each other no matter the weather.
Once your glue has set to both the surfaces and cured in time, no weathering conditions will be able to split them apart.
What's more, the Gorilla strong adhesive will not make you wait for hours before clamping. This, in turn, saves you tons of time which is quite important when engaging in projects.
Having a maximum clamp time of 30 minutes and a curing time of 24 hours, you won't have to sit around waiting for one component to dry. Simply wait for it to clamp and begin placing it in other parts of the project.
In addition, using this glue is a breeze because of its water-based formula. Most adhesives you have come across in your childhood have been water-based. This is exactly why you'll feel like a child again doing DIY projects in school.
- Easy to use due to its water-based formula
- Fast clamping time to reduce your wait
- ANSI/HPVA Type II water-resistance to survive tough weather
- Turns clear upon drying so you won't have unwanted glue stains
7. J-B Weld 8251 Wood Epoxy Adhesive
As with most of J-B Weld wood glue, the bonds you get from applying small amounts last you for ages.
What makes them even more desirable is the all-round reliability they provide with quick drying times and weather resistance.
As the adhesive is a two-part epoxy formula, it will cater to both indoor and outdoor repair projects.
Combining the resin and hardener will give strong, long-lasting bonds that will serve you till the end of time. It has been said that once the formula hardens, the bond is stronger than the wood itself!
Moving on to the curing and setting time, the mixture is made at a 1:1 ratio for the right consistency.
The epoxy formula takes around 6 minutes to set and a maximum of 3 hours to cure. Compared to other commercial epoxy materials, this is quite fast.
What's more, once the curing process is done, the WoodWeld is ready for you to do as you please.
You can paint over it to remove any sort of dry glue spots or sand and mold it according to your needs.
Although the light tan color will blend in with any particleboard, it is convenient to have the ability to paint over it.
- Versatile as it can be painted over, sanded and molded
- 1800 PSI tensile strength to hold the surfaces securely
- Fast curing time will shorten your waiting period
- Ideal for both outdoor and indoor usage as it is weather-resistant
8. Liquid Nails LN-547 FuzeIt Multi-Purpose Repair Adhesive
If you've broken something at home or are looking for an adhesive to use in your projects, then the FuzeIt Multi-purpose adhesive will be your ideal companion.
We know this article is solely targeted towards glue for particle boards and this glue fits into that just fine.
Maybe not specifically for particleboards, but the FuzeIt will stick almost anything together. Its versatility gains itself a spot on our already tough to decide list. Plastic, paper, wood, fabric, you name it, and this adhesive will stick it.
The versatility is aided further with the special formula which allows you to paint the glue once dry. Imagine having to build projects where a single dry glue spot ruins the aesthetics.
This is most common with thick white glue and other tan ones too. But with the FuzeIt, you can easily add a layer of color to conceal the glue spot.
Moreover, the container has been specifically designed to make it easier for you to use.
The package is resealable and has an integrated nozzle that allows for precise application. Since the glue isn't super runny, you won't be making a mess either.
- Works with all kinds of surfaces, which aids versatility
- Resealable nozzle allows you to store safely
- Can be painted once dry to cover any unwanted spots
- Resistant to heat, cold and weathering- thereby enhancing durability
Glue for Particle Board Comparison Chart
Clamping and Curing Time
No clamping, sets within 45 seconds
Anti-clog cap, No run gel
J-B Weld 8257
25 minutes clamping time, 1 hour to cure
Portable tube container
Cyanoacrylate (CA)"Super Glue" by Glue Masters
60 seconds for clamping
Works in wood, leather and plastic
30 minutes for clamping
Heat-resistant, Non-toxic formula
Twist-cap, Heat-resistance, Non-toxic
Gorilla Wood Glue
30 minutes clamping time, 24 hours to cure
Clear drying formula, Easy-to-use water based adhesive
J-B Weld 8251
6 minutes setting time, 3 hours to cure
Can be sanded, molded and painted over when dry
Liquid Nails LN-547
6 hours to cure
Compatible with all surfaces, resealable tube, Can be painted over when dry
Factors to Consider When Buying Glue for Particle Board
The bonding strength is the core benefit of glue. Some particle board glues have strong bonds but don't withstand for long. To avoid these problems, we have placed an easy guide for you to find the best glue for particle board.
The nature of the project highly influences the adhesive you use. If you're investing time into an outdoor project, you'll need glue with high water resistance. Regular particle board adhesive will not be able to withstand exposure to water and the bond will weaken within a short period of time.
Depending on the color of your board, you will need to decide whether you want a glue that remains visible after drying. Some adhesives will turn clear as they dry, while others may leave marks.
You can use thick glue, which will be visible after drying in areas where the project aesthetics aren't affected.
There are certain adhesives that can be colored over as well! This is a great way to camouflage the spots you might see upon drying. So if your project requires the use of paint, then these glues would be the perfect solution.
Easy to Store
When you're buying adhesives, you want one that will last you for multiple projects. And so, you should always make sure that the glue of your choosing should not dry up easily. Sealing the container properly will allow you to avoid such problems.
Projects require a large amount of patience and hard work. When you're already stressed out, you wouldn't want an adhesive that takes days to dry.
This is important as your project may have components that are reliant on one another. Therefore, if one part takes days to dry, the whole project takes longer to finish.
It's important to know that the standard drying time for adhesives should be at a max of 24 hours. This also depends on the thickness, as the thicker the glue, the longer it takes to dry.
The thickness of the adhesive for particle board is directly related to the strength of bonding. If you're looking to put together heavy objects, you would require a thick glue to hold them in place.
However, thicker glue does equal a longer period of drying time with higher chances of it being visible when dry.
Tips To Use Glue on Particle Board
When using glue on particle boards, there are a few tips and tricks that you should be aware of. These tips will help you get better finishing on your projects as well as be able to choose the right set of glue.
Firstly, you should be aware of the type of glue you're using, as that will determine the quality of the bond with your particleboard.
Epoxy Glue is two-part glue that consists of the resin and curing agent. This requires you to mix the two before you can apply them to your surfaces. Make sure you look into the mixing ratio in order to get the best results.
There are other types of adhesives, like Animal glue and Casein glue. However, they do not require any sort of mixing.
Be Aware of the Drying Time
Always get an idea of the clamping and curing time of the adhesive you purchase. This will allow you to invest in those products that can get your project done much faster.
Adhesives with quick clamping and curing times are ideal for projects with near deadlines.
Check After Drying Mark
Most glue in the market comes in white or tan colors, which dry up to form light spots. Some can be painted over when dry, while others will turn into a transparent layer.
Depending on your project requirements, you will need to choose a glue that will not hinder the aesthetics.
Frequently Asked Questions
1. How Does a Change in the Temperature Affect the Glue?
A higher temperature will make the glue runnier than usual, while a cold temperature will keep it gooey.
2. Can I Use Particleboard Adhesive on Other Surfaces?
Yes. The adhesives will work the same on surfaces like paper, plastic and other wood-based boards. As they are specifically made for wooden applications, they might not perform as well.
3. How Long Should I Wait Till I Can Use the Glued Component?
For most adhesives, you would have to wait a maximum of 24 hours. This is the optimum time it takes for the glue to cure and secure the bond.
However, this can differ from one glue to another, so make sure you take a look at the cure time before purchasing.
4. How Can I Safely Store Glue?
To prevent the glue from drying off, you should always keep the lid closed once you're done.
Any sort of leak or gap on the lid can cause air to seep into the container and dry off the glue. You may also find it helpful to store the glue in a cool, dry place.
5. Will Super Glue be Strong Enough to Stick Objects on My Particle Board?
When it comes to repairing small cracks or bits of your particleboard, super glue should work fine. But if you're looking to stick heavy components, you would need the binding strength of wood glue.
Thanks to the amazing specifications, the Gorilla Wood Glue is the best glue for particle board.
With its quick drying time and secure bonding properties, it will give you great performance. Additionally, the weather-resistance you receive will be perfect for outdoor projects.
However, this doesn't mean the other options on the list are in any way inferior. Look into the features, and you should be able to choose one that suits your needs best.
Few Other Resources: